イノコアクリルシステム正確なカラーカーペイント

Preparation of Substrates

Apply over original stoved finishes or over recommended InnoColor primers. Degrease all surfaces to be painted with RZ800/RZ800M before wet sanding with P600-800 grade paper or dry sanding with P400-500 grade paper. Wash off residues and dry thoroughly before re-cleaning with appropriate InnoColor substrate cleaner. The use of a tack rag is recommended.

Mixing Ratio

<15°C

RZ2K Topcoat           100 parts RZ9888F Hardener             50 parts RZ940F Thinner     20-30 parts

15-25°C RZ2K Topcoat   100 parts RZ9888ST Hardener       50 parts RZ940STThinner20-30 parts

25-35°C RZ2K Topcoat          100 parts RZ9888S Hardener                 50 parts RZ940S Thinner       20-30 parts

NO. of Coats

2-3 coats,total 40-60um

Flash-off time

At 20°C, 5-10 minutes between coats. Allow 15-20 minutes air-drying time before force drying.

Application Viscosity

14-17 s/DIN4

Spray Gun

Set-Up

Gravity Feed: 1.2-1.5mm   Siphon Feed: 1.4-1.7mm

Conventional: 3-4 bar   RP: 2.0-2.5 bar     HVLP: 2.0 bar

Pot-Life

At 20°C:

2 hours with RZ9888F Hardener 4 hours with RZ9888ST/RZ9888S Hardener

Drying Time

Temperature

Dust free

Tack free

Dry to handle

Dry to polish

20°C

45 minutes

2-3 hours

10 hours

16 hours

60°C

5 minutes

15 minutes

30 minutes

60 minutes

Shelf life

2 years in original sealed can at cool and dry place at 20°C

Packaging

1Le*12 3.75Le*4